Accessories

Our custom-made aluminum adapters allow installation of a single or dual LADCARB LDC MULTI-SYSTEM and FIX-LITE SECLAD OR SINLAD ladder to any model of vehicle-borne assault platform.  

While the original aluminium ladders are so heavy that they have to be operated by at least 2 persons, the LADCARB ladders can be easily lowered or lifted by one operator.

Please, note that different models of Assault Platforms use different ladder mounting systems. Our adapters are always custom-made according to the specification provided by the customer.

REBS/LADCARB Flexi Adapter provides for full compatibility of LADCARB LDC, FIX-LITE and POLE ladders with H.HENRIKSEN – REBS TACTICAL hooks.

The Flexi adapter lowers the stress on the top rail ending and keeps the hook ladder in an optimum vertical position.

Universal LADCARB TOP Anti-slip Ending is an essential part of most of the ladder applications. It prevents the ladder rails from slipping and also protects the rail ends from damage.  

Despite the fact that it is recommended to be on the upper part of the ladder, it can be also used on the lower part if the situation does not allow turning of the ladder. Rubber Anti-Slip Foot is easily replaceable.

Dual ladder connector consists of 2 aluminum clamps secured by bolts. Using a set of 2 these connectors allows to connect 2 LDC or FIX-LITE ladders together for a fast entry of larger assault teams.

LADCARB FLEXI ADAPTER reduces stress caused by attached hooks on ladder stiles and helps to keep hanged ladder in optimum vertical position. It is secured to ladder stiles by strong ball-locking pin.

WARNING!This adapter designed only for arched hooks and MUST NOT be used with LADCARB “AT” tactical urban hook!

Mobile Stand-Off devices are essential parts of a hook ladder. They maintain the distance of the ladder from a wall assuring safe position of feet on the rungs.

These devices can be placed to any part of a ladder depending on the wall profile. They can be also used on the Emergency Stretcher to prevent contact of an evacuated patient with the ground.

Simple design consists of an aluminum clamp secured by a bolt with a wing nut and replaceable stand-off extenders with anti-slip rubber foot. Extenders are available at 2 different lengths. Special wing nut allows easy manipulation even with gloves and it is secured against unintentional release.

Universal STAND-OFF EXTENDERS with an M10 male thread can be attached to Mobile Stand-Off Device clamps, to Universal Bottom Endings and to LADCARB MARINE boarding ladder.

Extenders are available at 3 different lengths (100 mm, 150 mm) but the longest ones are mostly used only for MARINE boarding ladders.

Anti-slip foot made of special rubber prevents sliping and reduces noise when leaning against a wall or a ship hull.

LADCARB Tactical Compact Hook CT shape is designed for both urban and maritime operations. It can be hanged by the arch or tip. It is a perfect tool for climbing on balconies or boarding smaller vessels. 

Thanks to its compact size it fits between ladder rungs for easier transportation. Rear part is adapted for attaching Universal Hook Handles.

COMPACT HOOK “CT” – Specifications

LADCARB Tactical Urban Hook AT shape is designed mainly for entering buildings through windows and flat roofs. Sharp tip can easily break window glass. 

Sharp teeth on the blade hold the hook firmly on a window frame or flat surface. Rear part is adapted for attaching Universal Hook Handles.

TACTICAL URBAN HOOK “AT” – Specifications

Durable and efficient Window-breaking heads with hard-steel tips allow to use LADCARB LDC MULTI-SYSTEM AND FIX-LITE SECLAD ladders for breaking through windows of buildings, busses, trains and other vehicles.

 For entering vehicles perfectly suit shorter versions of the ladders. Using a ladder for breaking through windows directly makes an assault entry much faster.

LADCARB WIRE ladders are available at 2 different lengths. They can be connected by carabiners without a change of step spacing. All metal parts like wires, ferrules, thimbles and safety devices are made of marine-grade 316L stainless steel. Crimped by hydraulic press, the wire ends are the strongest available on the market. Carbon composite rungs filled with foam and sealed by Epoxy resin provide for superb strength, low weight and almost neutral buoyancy.

Both length options can be connected by carabiners without changing ladder rung spacing. 

The shorter version of the ladder is an essential part of any Hook Ladder. It helps to overcome distance between the ground and lower ladder end which can often exceed 1.5 m. It is even more important for Marine Boarding ladders where it prevents unhooking and fall of the ladder at rough seas.

Certain tactical situations require precise ladder length or placing a ladder on uneven terrain. Rail Extender allows to extend the ladder length for additional 0.18 m or place a ladder on a stairs.

 The Rail Extender is fully compatible with LADCARB LDC and FIX-LITE SECLAD/SINLAD ladders including standard Top and Bottom Anti-slip Endings.

Rescue kit contains a stretcher cover which can be attached to 2 connected section of LADCARB LDC ladder. Fixing belts with safety buckles allow a victim to be transported at different angles.

It is suitable for any kind of technical rope rescue even in confined spaces.

Evacuation set of 6 loops, 4 carabiners with a rigging plate and a self-breaking descender can be used for evacuation by hand, winch or under a helicopter.

RESCUE PACKAGE

• Stretcher cover with safety stripes
• Spinal board
• Neck fixator
• Light bag

EVACUATION PACKAGE:

• 6 certified loops (4×1.5 m, 2×1.2 m)
• Rigging plate
• 3 aluminium carabiners
• 1 steel carabiner
• PETZL descender

Universal hook handles secured by 2 ball-locking safety pins can be attached to the rear part of hooks to make final phase of climbing easier. For entering low-clearance windows they can be turned upside down.

Universal hook handles are compatible with all LADCARB tactical titanium hooks.

Easy to install aluminum plates (with quick-release system) make walking on the bridge faster and safer and allow using the bridge as a loading/crossing ramp for lighter motorcycles, EOD robots etc.

Dimensions: 37 cm x 108 cm, 3,8 kg, Material: Aluminium

Light and compact Webbing Extension Ladder is an essential part of any Hook Ladder. It helps to overcome distance between the ground and lower ladder end which can often exceed 1.5 m.

 It is even more important for Marine Boarding ladders where it prevents unhooking and fall of the ladder at rough seas.

 Longer versions are available upon request.

Designed directly for one of the well-known anti-terrorist units, Window-breaking plate is a special tool for breaking through windows (mostly on buses, street-cars or trains) protected by advertising film or anti-vandal foil.

 Even when broken by an impact of sharp tools, the foil-covered glass remains in the frame. The best way how to get in is to break the glass with our extremely efficient sharp-tip Window Breaking Hammer and push it in using impact of heavy rubber plate attached to the ladder section. After breaking through the glass, the plate serves as an ideal anti-slip support for the ladder.

Window-breaking hammer is a very efficient tool how to break even very thick window glass of vehicles. Replaceable sharp tips made of hard steel are identical with tips used for our Window-breaking head.

The hammer is available in 2 different lengths (0,4 m / 1,1 m) – short for lower windows and long for windows of double-decker buses etc.