Accessories

Our custom-made aluminum adapters allow installation of a single or dual LADCARB LDC MULTI-SYSTEM and FIX-LITE SECLAD OR SINLAD ladder to any model of vehicle-borne assault platform.  

While the original aluminium ladders are so heavy that they have to be operated by at least 2 persons, the LADCARB ladders can be easily lowered or lifted by one operator.

Please, note that different models of Assault Platforms use different ladder mounting systems. Our adapters are always custom-made according to the specification provided by the customer.

REBS/LADCARB Flexi Adapter provides for full compatibility of LADCARB LDC, FIX-LITE and POLE ladders with H.HENRIKSEN – REBS TACTICAL hooks.

The Flexi adapter lowers the stress on the top rail ending and keeps the hook ladder in an optimum vertical position.

It allows easy lifting and removal all LADCARB tactical hooks with soft ladders while maintaining full lateral control of the hook. It is designed for use in combination with LADCARB Wire ladder adapter.

A simple fork-like adapter can be attached either to our Tactical poles, to RollaTube clamp adapter or to any other pole using female M8 x 1.25 interface.

Universal LADCARB TOP Anti-slip Ending is an essential part of most of the ladder applications. It prevents the ladder rails from slipping and also protects the rail ends from damage.  

Despite the fact that it is recommended to be on the upper part of the ladder, it can be also used on the lower part if the situation does not allow turning of the ladder. Rubber Anti-Slip Foot is easily replaceable.

Dual ladder connector consists of 2 aluminum clamps secured by bolts. Using a set of 2 these connectors allows to connect 2 LDC or FIX-LITE ladders together for a fast entry of larger assault teams.

LADCARB FLEXI ADAPTER reduces stress caused by attached hooks on ladder stiles and helps to keep hanged ladder in optimum vertical position. It is secured to ladder stiles by strong ball-locking pin.

WARNING!This adapter designed only for arched hooks and MUST NOT be used with LADCARB “AT” tactical urban hook!

Universal Molle-compatible bag for LADCARB tactical hooks is a sophisticated product with exchangeable organizers and poaches for different models of hooks and accessories.

LADCARB LDC Multi-system carrying bag contains 8 foam-protected chambers for ladder stiles and 2 poaches for rungs. Padded webbing handles can be also used for carrying on the shoulder or on the back for shorter distances. Molle system allows installation of different bags or poaches for accessories.

Mobile Stand-Off devices are essential parts of a hook ladder. They maintain the distance of the ladder from a wall assuring safe position of feet on the rungs.

These devices can be placed to any part of a ladder depending on the wall profile. They can be also used on the Emergency Stretcher to prevent contact of an evacuated patient with the ground.

Simple design consists of an aluminum clamp secured by a bolt with a wing nut and replaceable stand-off extenders with anti-slip rubber foot. Extenders are available at 2 different lengths. Special wing nut allows easy manipulation even with gloves and it is secured against unintentional release.

LADCARB POLE ladder Bottom Stand-off helps to maintain the distance of the ladder from a wall assuring safe position of feet on the rungs. Its rubber foot also protects the lower end of the ladder from damage.

 Holes in the beams allow connection of a Wire or Webbing extension ladder by carabiners.

LADCARB POLE ladder Mobile Stand-off helps to maintain the distance of the ladder from a wall assuring safe position of feet on the rungs. It can be placed to any part of a ladder.

 Clamp is secured by a bolt and wing nut allowing operation even in gloves. The nut is secured against unintentional release and loss.

Universal STAND-OFF EXTENDERS with an M10 male thread can be attached to Mobile Stand-Off Device clamps, to Universal Bottom Endings and to LADCARB MARINE boarding ladder.

Extenders are available at 3 different lengths (100 mm, 150 mm) but the longest ones are mostly used only for MARINE boarding ladders.

Anti-slip foot made of special rubber prevents sliping and reduces noise when leaning against a wall or a ship hull.

LADCARB Tactical Compact Hook CT shape is designed for both urban and maritime operations. It can be hanged by the arch or tip. It is a perfect tool for climbing on balconies or boarding smaller vessels. 

Thanks to its compact size it fits between ladder rungs for easier transportation. Rear part is adapted for attaching Universal Hook Handles.

COMPACT HOOK “CT” – Specifications

LADCARB Tactical Universal Hook BT shape is designed for both urban and maritime operations. It can be hanged by the arch or tip.

Wide span allows hanging by arch even on massive beams and ship railings. Rear part is adapted for attaching Universal Hook Handles.

UNIVERSAL HOOK “BT” – Specifications

LADCARB Tactical Urban Hook AT shape is designed mainly for entering buildings through windows and flat roofs. Sharp tip can easily break window glass. 

Sharp teeth on the blade hold the hook firmly on a window frame or flat surface. Rear part is adapted for attaching Universal Hook Handles.

TACTICAL URBAN HOOK “AT” – Specifications

Universal hook handles can be attached to the rear part of hooks to make final phase of climbing easier. For entering low-clearance windows they can be turned upside down.

Durable and efficient Window-breaking heads with hard-steel tips allow to use LADCARB LDC MULTI-SYSTEM AND FIX-LITE SECLAD ladders for breaking through windows of buildings, busses, trains and other vehicles.

 For entering vehicles perfectly suit shorter versions of the ladders. Using a ladder for breaking through windows directly makes an assault entry much faster.

LADCARB WIRE ladders are available at 2 different lengths. They can be connected by carabiners without a change of step spacing. All metal parts like wires, ferrules, thimbles and safety devices are made of marine-grade 316L stainless steel. Crimped by hydraulic press, the wire ends are the strongest available on the market. Carbon composite rungs filled with foam and sealed by Epoxy resin provide for superb strength, low weight and almost neutral buoyancy.

Both length options can be connected by carabiners without changing ladder rung spacing. 

The shorter version of the ladder is an essential part of any Hook Ladder. It helps to overcome distance between the ground and lower ladder end which can often exceed 1.5 m. It is even more important for Marine Boarding ladders where it prevents unhooking and fall of the ladder at rough seas.

Heavy-duty framed backpack allows carrying of full LADCARB Multi-System set stored in the Transportation Bag for long distances.

TACPOLE carbon telescopic pole 320 is designed mainly for lifting LADCARB MARINE boarding ladders. However, thanks to replaceable interface it is possible to attach a lot of other accessories. 

This pole is compatible with the Hook lifting adapter, EOD hook, ¼ inch or 3/8 inch standard camera adapter, gooseneck etc.

 Other lengths are available upon request.

LDC POLE Plate Set helps to stabilize LADCARB LDC Multi-purpose Pole assembled from th LDC ladder stiles (rails). It consists of an aluminium plate, guy-wire.

Certain tactical situations require precise ladder length or placing a ladder on uneven terrain. Rail Extender allows to extend the ladder length for additional 0.18 m or place a ladder on a stairs.

 The Rail Extender is fully compatible with LADCARB LDC and FIX-LITE SECLAD/SINLAD ladders including standard Top and Bottom Anti-slip Endings.

RAPTOR Anti-slip adapter prevents ladder slipping when leaning against train or bus metal stairs.

Due to uneven or slippery terrain around railroads the rubber anti-slip feet may not be enough to prevent ladder slipping during fast assault. Raptor adapter attached to upper rail ends keeps the loaded ladder firmly on stairs. It also allows installation of Top Anti-slip endings to be ready for different scenarios.

Rescue kit contains a stretcher cover which can be attached to 2 connected section of LADCARB LDC ladder. Fixing belts with safety buckles allow a victim to be transported at different angles.

It is suitable for any kind of technical rope rescue even in confined spaces.

Evacuation set of 6 loops, 4 carabiners with a rigging plate and a self-breaking descender can be used for evacuation by hand, winch or under a helicopter.

RESCUE PACKAGE

• Stretcher cover with safety stripes
• Spinal board
• Neck fixator
• Light bag

EVACUATION PACKAGE:

• 6 certified loops (4×1.5 m, 2×1.2 m)
• Rigging plate
• 3 aluminium carabiners
• 1 steel carabiner
• PETZL descender

Rolatube coiled poles are a smart solution often replacing telescopic poles. Our Rolatube adapter with M8 female thread allows installation of the Hook lifting adapter and many other accessories to 50 mm Rolatube Pole.

Universal hook handles secured by 2 ball-locking safety pins can be attached to the rear part of hooks to make final phase of climbing easier. For entering low-clearance windows they can be turned upside down.

Universal hook handles are compatible with all LADCARB tactical titanium hooks.

Easy to install aluminum plates (with quick-release system) make walking on the bridge faster and safer and allow using the bridge as a loading/crossing ramp for lighter motorcycles, EOD robots etc.

Dimensions: 37 cm x 108 cm, 3,8 kg, Material: Aluminium

Light and compact Webbing Extension Ladder is an essential part of any Hook Ladder. It helps to overcome distance between the ground and lower ladder end which can often exceed 1.5 m.

 It is even more important for Marine Boarding ladders where it prevents unhooking and fall of the ladder at rough seas.

 Longer versions are available upon request.

Designed directly for one of the well-known anti-terrorist units, Window-breaking plate is a special tool for breaking through windows (mostly on buses, street-cars or trains) protected by advertising film or anti-vandal foil.

 Even when broken by an impact of sharp tools, the foil-covered glass remains in the frame. The best way how to get in is to break the glass with our extremely efficient sharp-tip Window Breaking Hammer and push it in using impact of heavy rubber plate attached to the ladder section. After breaking through the glass, the plate serves as an ideal anti-slip support for the ladder.

Window-breaking hammer is a very efficient tool how to break even very thick window glass of vehicles. Replaceable sharp tips made of hard steel are identical with tips used for our Window-breaking head.

The hammer is available in 2 different lengths (0,4 m / 1,1 m) – short for lower windows and long for windows of double-decker buses etc.

Light bag for Window-breaking Plate can also accommodate one set of Window-breaking heads and shorter version of the Hammer.

Hook lifting adapter compatible with LADCARB arch-shaped hooks “BT” and “CT” extends the hook lower part in order to prevent swinging when loaded with a Wire or Webbing ladder.

 Hook safety ball-locking pin serves as a spigot for Hook Lifting Adapter. Certified 23 kN dual sling with light and strong aluminum carabiners is easily replaceable.

LADCARB WIRE LADDERS are available at 2 different lengths. They can be connected by carabiners without a change of rung spacing. Rungs are made of carbon tubes and metal parts of marine-grade stainless steel.

Secured by stainless steel ferrules, the wire ends are the strongest available on the market. Carbon composite rungs filled with foam and sealed provide for superb strength, low weight and almost neutral buoyancy.

 Attached soft ladder is an essential part of any Hook Ladder. It helps to overcome distance between the ground and lower ladder end which can often exceed 1.5 m. It is even more important for Marine Boarding ladders where it prevents unhooking and fall of the ladder at rough seas.

 LADCARB WIRE LADDER can be also used in combination with a hook in many tactical situations.

LADCARB WIRE LADDERS are available at 2 different lengths. They can be connected by carabiners without a change of rung spacing. All metal parts are made of marine-grade stainless steel. Carbon composite rungs filled with foam provide for superb strength, low weight and almost neutral buoyancy.

 Attached soft ladder is an essential part of any Hook Ladder. It helps to overcome distance between the ground ladder end. It is even more important for Marine Boarding ladders where it prevents unhooking and fall of the ladder at rough seas.

LADCARB WIRE LADDER can be also used in combination with a hook in many tactical situations.

NATO approved parachute drop-bag can accommodate 5 shorter (2-rung) sections of the LADCARB FIX-LITE SECLAD ladder in total length of 3.2 m with all compatible accessories. Due to the ladder extremely low weight it is necessary to add other heavy gear like ammunition, water etc. to maintain minimum weight of 25 kg.

Soft transportation bag accommodates 6 sections of the LADCARB FIX-LITE SECLAD sections, which means one full 5.0 m long set. Compact size designed only for shorter sections (2 rungs) can be made upon request. Outer pockets can be used for Rail Extenders, Raptor Adapters, Anti-slip Endings etc.